• Real crown cut oak veneered finish
• 2-piece SWB
• 3-Piece LWB (Vivaro MK2 and VW T7/ New 2024 Ford Transit Custom SWB 3-piece)
• CNC cut to size
• Sustainable plywood
• Delivery available

The oak floor must be bonded to prevent the wood warping, although easy in theory, achieving a perfect finish can require a certain level of attention to detail. Firstly, dry fit your floor, they are designed to fit perfectly snug after ply lining and carpet, however if any trimming is required this is the time. Secondly, we recommend filling the van rib gaps with 9mm ply for a better base support, however this is not imperative. When fitting apply an even amount of adhesive onto the ribs, we recommend soudal fix all turbo adhesive. Once the floor has been laid, apply even pressure throughout so the floor is in contact with all the ribs. Finally, the floor must be weighed down with significant weight, ensuring all the floor is in contact with the ribs and bond, this is most important over the join. An alternative to weight can be using acrow props, just ensure you are applying pressure evenly and inline with the van ceiling ribs to avoid damaging any headliners

• For VW T5/6 This floor requires a full length WIDE threshold and a side load extra steep door step trim cover.
• Other vans may also require Wide rear and steep side trims.
• Some floors may require slight trimming depending on ply-lining, insulation and carpet used.
• Vivaro/ Trafic/ Primstar – Vivaro mk2 2014-2018/ Trafic 2014< / Nissan Primstar 2022< / Nissan NV300 2014-2021/ Fiat Talento 2016-2020